
TN-35 (1)
High Speed Cross Cone Winder (One Spindle)
(Cone Type / King Spool Type / Spool Type)
(King Spool Type For Bonded yarn)

Feature
Other characteristics
Specifications
Feature
Feature
Individual spindle control
- Computer yarn length measurement.
- Yarn speed is available for 300~1600 meter/per min.
- It depends on type of thread to be wound,800~1400 meters/per min is normally recommended
Drum thread guiding system
- High speed, low noise operation.
- Drum with special hardened polish treatment, smooth & Wear resistance.
Electro-magnetic tension device
- Automatic tension release throughout the cycle for consistent winding tension.
Auto lubrication system
- Lube roller speed is adjustable & proportional to yarn speed.
- TN17 Dosing pump lube system is also available. (option)
TN17- Dosing pump lubrication system and External oil drum set (optional)
- OLED display and membrane keys easy operation.
- Follow and match the yarn speed to apply oil on threads evenly.
- Simple operation and easy maintenance
- Transparent oiling window, convenience for real-time monitoring and maintenance.
- The amount of oil applied can be adjusted by stepping motor, and the minimum oil value can be set 0.2g/min
- The V-shaped groove of the oil inlet is equipped with a sponge, to absorb and concentrate excess residual oil, preventing overflow and temperature loss.
- Induction heating module, the heating temperature can be adjusted from 35°C to 95°C. OLED display and membrane buttons for easy operation.
Circulating oiling tank. (optional)
- Keep always the full level of oil to each spindle.
- One oil tank can supply for the use of 36 spindles.
- Hot lube take is also available with temperature controller (optional)
- Big-scale return oil trough and oil fender to filter without pollution and oil waste.
- One oil filter is devised for every oil wheel to reduce the oil slinging out.
- Detachable filter, easy to clean.
Other characteristics
Other characteristics
- Cone,Spool type is available for S.P. threads,cotton threads & sewing threads.
- Kingspool type is available for embroidery threads,nylon threads & bonded threads.
- For filament yarns,fiber yarns,monofilament yarns & technical threads are subject to final confirmation
Specifications
All specifications and designs subject to change without notice.
- Standard Equipment


Drum thread-guiding system


Electro-magnetic tension


Constant lubrication system


Micro processor controller
- Optional


Circulating oiling tank


Hot circulating oiling tank


Circulating stirring lube tank


Dosing pump lubrication system